The pictures do not show... but I am pretty sure he ran it like the first z that he did. If you go to that thread "our first 370z" or something like that there are pictures where he went through the rubber sleave. I had a little bit of problems with this but after talking to him about it, it wasn't to hard. You have drill out a hole in the harness to get the wire through. To pop off the harness there is a lever that needs to be pushed all the way down... my problem was that it was only going about 3/4 down. It helps it you close the door slightly. This allows for the lever to go down but gives you less room for your had to get back there. Hope that helps.
|