Quote:
Originally Posted by Junkman2008
I would highly advise against doing this! 400 grit??? You may as well be sandblasting the chip! You can't just sand something with that grit and then use touch-up paint. That would look like crap!
|
looks like someone got his panties all mangled up. the 400grit is to remove the rust. then clean off the area with rubbing alcohol. if you have primer, that's great, you can take a tooth pick with the tip flattened and apply. then take your touchup paint, new toothpick with the tip flattened and apply several coats until it is at the surrounding paint layer. there's touchup applicators you can get online too, but not needed.
then dry 2 weeks. if you choose to do so, take 2000grit or higher (i have a 3000grit sanding block) and wetsand until flat. polish. then wax. for most people they probably wont do this wetsanding step.
langka is good, but it's not perfect either.