Quote:
Originally Posted by ChrisSlicks
I have the Forgestar 18x10 up front, 18x11 rear, lowered with camber kit. Fitment was just fine, plenty of clearance to the lip with my 3.0 degrees of camber and I imagine fairly flush looking but still no rub if you backed it down to between 1.0 and 1.5. I had a slight clearance issue at full lock when I installed my BC ER coilovers, but this was the wheel hitting the external reservoir and I was able to rotate the placement of the reservoir slightly to prevent that.
|
Hrrmm so with some negitive camber and around 1inch drop or so, 19x10 upfront should have minimal rub with a 265 35 or so?
Edit* with a +30 something offset. Any issues with running the 19x9 F 19x11 R? I would think this could possibly create some unwanted understeer? Maybe i should create a thread in the wheel/tire section.. Sorry for the jack!