Nissan 370Z Forum - View Single Post - Any harm to putting washers under the crossmember?

Lee123 · 06-24-2010, 12:05 PM

Is there any harm to putting two washers (about 3/16" total thickness) under the crossmember at each of the 4 bolts? That is the only way to get enough clearance to stop my Stillen CBE from rattling. I've found a couple of posts saying it is a bad idea but I want to be as sure as possible because I'm happy with the Stillen other than this and don't want to replace it if it's OK to just leave the washers there.

06-24-2010, 12:05 PM	#1 (permalink)
Lee123 Base Member Join Date: Apr 2010 Location: Phoenix Posts: 84 Drives: 2010 370Z Roadster Rep Power: 15	Any harm to putting washers under the crossmember? Is there any harm to putting two washers (about 3/16" total thickness) under the crossmember at each of the 4 bolts? That is the only way to get enough clearance to stop my Stillen CBE from rattling. I've found a couple of posts saying it is a bad idea but I want to be as sure as possible because I'm happy with the Stillen other than this and don't want to replace it if it's OK to just leave the washers there.