ok, i will have to check about journal diameters between vq40 crank and vq37. i did not totally under stand about cutting 10mm( where?).i am not too worried about rod ratio as i build a honda running with piston speed of around 5500fps. so i am not afraid of taching out this longer rod setup. And yes the cranks are pretty cheap, not as cheap as he states but pretty close, but there is a lot of room since the stroker kits r 6k. just add it up the crank , rods, pistons, bearings, rings, balancing... 500 + 1000 + 1000+ 200+150+ 350 =3200 - 6000 = 2800 savings... me likey
__________________
Best 1/4 mile 12.24 Best mph 114.5_______
|