View Single Post
Old 05-11-2010, 02:20 PM   #509 (permalink)
Zsteve
A True Z Fanatic
 
Zsteve's Avatar
 
Join Date: Sep 2009
Location: TX
Posts: 3,298
Drives: the 2 balled club
Rep Power: 21
Zsteve is a splendid one to beholdZsteve is a splendid one to beholdZsteve is a splendid one to beholdZsteve is a splendid one to beholdZsteve is a splendid one to beholdZsteve is a splendid one to beholdZsteve is a splendid one to behold
Default

Quote:
Originally Posted by Kyle@STILLEN View Post
As we've said before we aren't going to release any specific data on this subject because there is no possible way to answer it. Intake air temperature does not have an "average." There are way too many variables such as ambient air temperature, RPM, and much much more...

What we can say is that during our testing at El Toro we were extremely pleased with what we saw. We saw temperature drops of well over 100 degrees post intercooler. And, during our heat soak testing we saw the temperature decrease rapidly once the car started moving again. As I've explained before, we put the car through a torture test to build as much heat as we could, parked it for ten minutes to let that heat soak into everything, then fired the car back up and performed a 0-140 MPH run. We were VERY pleased to see how quickly the intercooler coolant temperatures dropped as soon as we started moving again.
I would think you could tell us what the temp was before the IC and after just so we can see if the before temps were on par with the amount of heat put out by othe FI systems. 100 degree drop is good but only if the before temps werent overly high to begin with.

For me, still being undecided which kit to get, the amount of cooling the two different ICs do is very important to my decision. I will be asking the same from the other kit too.
__________________
2010 LS3 C6 Silver coupe corvette
Zsteve is offline   Reply With Quote