View Single Post
Old 05-06-2010, 12:24 PM   #1 (permalink)
AJ@ECSMotorsports
The370Z.com Sponsor
 
AJ@ECSMotorsports's Avatar
 
Join Date: Oct 2009
Location: Central Florida
Posts: 1,290
Drives: '10 335i| '12 GT-R
Rep Power: 17
AJ@ECSMotorsports is on a distinguished road
Send a message via AIM to AJ@ECSMotorsports
Thumbs up AEM Electronic Tuned Intakes Now Available! + 9.67rwhp & FREE S&H!!



We are an authorized AEM Dealer. Buy authorized and be assured your intake includes FULL warranty and is 100% authentic AEM.

Once again AEM is raising engineering standards with an all new series of innovative air intake systems. With a revolutionary ETI module and fully integrated design, we have eliminated the need to detune or stage an intake tube diameter as it crosses the MAF sensor. The sensor is electronically adjusted to read proper air density instead of using physical tube designs intended to “trick” the MAF reading. The result is bigger horsepower and torque gains.

Available for the 09+ Nissan 370Z in Silver and Polished Powedercoat Finish





Link to Dyno Chart

Link to Installation Instructions

Product Style: AEM Cold Air Intake System
Estimated Horsepower Gain: 9.67 HP @ 7100 RPM
Replacement Filter: 21-202DOSK
Street Legal In All States: No
Weight: 14.9 lb (6.8 kg)



TECH TALK:
Most modern fuel injected cars use a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube because the airspeed is reduced. This causes the MAF sensor to “under report” air flow causing a lean condition at worst and a Check Engine Light at best. To accommodate MAF sensor reporting, many intake systems reduce the diameter of the intake tube near the MAF sensor to stock or near stock size because of the need to maintain the correct air speed for the sensor to report the correct flow rate to the ECU. AEM's ETI Intake System is an alternative design approach that allows the intake tube to maintain its diameter resulting in more air flow into the throttle body. The ETI Intake System allows AEM to tune an engine for even more power by avoiding any tube down-sizing that will reduce overall airflow and horsepower. Instead the ETI electronically communicates with the MAF sensor to ensure an accurate amount of fuel is being delivered even though the tube is larger in size than the stock system. This means the vehicle maintains the calibration as intended by the factory while enjoying the benefits of our custom designed aftermarket intake system.



Please PM/Post/IM/Call us for Special 370Z Member Pricing!

Thank you all for checking out these awesome new intakes!
Best regards,
AJ
ECS Motorsports
__________________

Your 370Z/G37 Performance Specialists!
PH: 1-855-ECS-PARTS | PM me | E-Mail Us | AIM - ECSMotorsports | Facebook Us!
AJ@ECSMotorsports is offline   Reply With Quote