Nissan 370Z Forum - View Single Post

ZforMe · 04-01-2010, 10:45 PM

I just removed my vent covers last night. All i did was drive the car up on ramps, remove the cover underneath the engine (a whole bunch of 10mm screws), then i was able to take a little 10mm wrench and loosen the two screws per side and take them the rest of the way out by hand. So it's possible without removing the bumper. FYI, i have smaller arms and hands, so i was able to manuaver up there pretty easy. Once the two screws are out you still have to kind of snap them out of the grill, scared me a bit, but it was no big deal.

04-01-2010, 10:45 PM	#38 (permalink)
ZforMe Base Member Join Date: Jan 2009 Location: Memphis TN Posts: 238 Drives: 370Z Sport Auto PG Rep Power: 16	I just removed my vent covers last night. All i did was drive the car up on ramps, remove the cover underneath the engine (a whole bunch of 10mm screws), then i was able to take a little 10mm wrench and loosen the two screws per side and take them the rest of the way out by hand. So it's possible without removing the bumper. FYI, i have smaller arms and hands, so i was able to manuaver up there pretty easy. Once the two screws are out you still have to kind of snap them out of the grill, scared me a bit, but it was no big deal. __________________ 13.369 @ 102.73 Bone Stock. BERK HFC's installed 5/14/09 @ 1490miles, 13.212 @ 106.15. Cobb Post MAF Hoses installed 3/20/10 @ 5,043miles, future: FI exhaust with 18" res and s/s cans.