Nissan 370Z Forum - View Single Post - DIY: SpawnAero CF B-Pillars

bullitt5897 · 02-17-2010, 06:47 PM

Guys you simply glue the stock white plugs to the back of the CF pieces with the 3m tape as a buffer. If it does not line up you measured wrong and will need to try again also remember to glue around the 3m making a gel seal around the whole base of the plug and 3m and backing of CF b-pillar.

Also, I know that a few of Spawn Aero's units had quality issues and if you look in the exterior and interior thread you will see that I have organized an effort to get everyone the quality parts they ordered.

Thanks,

Mike

02-17-2010, 06:47 PM	#16 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Guys you simply glue the stock white plugs to the back of the CF pieces with the 3m tape as a buffer. If it does not line up you measured wrong and will need to try again also remember to glue around the 3m making a gel seal around the whole base of the plug and 3m and backing of CF b-pillar. Also, I know that a few of Spawn Aero's units had quality issues and if you look in the exterior and interior thread you will see that I have organized an effort to get everyone the quality parts they ordered. Thanks, Mike __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*