View Single Post
Old 11-04-2026, 12:46 PM   #1088 (permalink)
gbrettin
A True Z Fanatic
 
gbrettin's Avatar
 
Join Date: Oct 2010
Location: Portage, MI
Posts: 2,307
Drives: Tricycle
Rep Power: 589453
gbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond reputegbrettin has a reputation beyond repute
Default

Slayton and I put the Varis Kamikaze hood on, mostly Slayton. Measured out the cuts and drilled out holes for Quik-Clip hood pins. It's a pretty expensive hood so it's not something I wanted messed up. After all that, I put on Z1 hood struts because I don't have a hood prop due to the core support being removed by yours truly.

Had a few small problems driving the car, it is what it is. Broke the throttle cable due to the cyclical fatigue pulling at a slight off angle and 90deg (see picture). Just need to cut the pedal and change it so that the cable pulls straight back. Couple machine screws backed out on the steering wheel because there was no thread locker - Steering wheel wasn't done by me. The wheel also isn't perfectly straight up and down so I will fix that over the winter. Like I said, couple small annoyances but nothing major.

I ended up clay baring the whole car because the paint felt like sandpaper due to the shop and swamp sitting on the paint for years. There's a few small dents, nothing I'm overly concerned with.











gbrettin is offline   Reply With Quote