ZoomZ

DRIVE BELT : Checking INFOID:0000000011736876
WARNING:
Be sure to perform this step when engine is stopped.
• Check that the indicator (C) (notch on fixed side) of drive belt auto-tensioner is within the possible use range
(A).
NOTE:
• Check the drive belt auto-tensioner indication when the engine is cold.
• When new drive belt is installed, the indicator (notch on fixed side) should be within the range (B) in the fig-
ure.
• Visually check the entire drive belt for wear, damage or crack.
• If the indicator (notch on fixed side) is out of the possible use range or belt is damaged, replace drive belt.
DRIVE BELT : Tension Adjustment

Attached Images

MA Maintenance.jpg (387.5 KB, 2 views)

__________________
“Action without vision is a nightmare.”