Quote:
Originally Posted by filip00
Raising this thread as I finally had a chance to observe oil pressure for a moment and I'm not sure if I'm worried for no reason or not.
So, I only just checked cold/warm idle and 3k rpm pressures and they were:
Cold startup oil pressure: 7.5bar ~ 108psi
Warm idle oil pressure: 1.6bar ~ 23psi
Warm at 3k rpm: >4bar ~ 58psi
This is with the 25row oil cooler with the thermostatic plate (so it wasn't open at the time of reading), and the pressure sensor is Tee'd of the factory mounting point.
I have replaces galley gaskets last year. This should all be good, right?
|
Those all seem fine. Maybe a bit lower than typical but they’re in spec.
Nissan calls out >14psi at idle, >42psi at 2k rpm when warm.
Sent from my iPhone using Tapatalk