Go to harbor freight and buy an engine hoist. Take off upper manifold. Get a piece of angle iron, drill it so it mounts to two manifold bolt holes. Tape lower manifold off. Bolt angle iron. Lift with hoist. Replace subframe. Return hoist to HF bc "the welds were subpar."
That's what I did, minus replacing the subframe, when I busted a motor mount and the other one seized so I couldn't do the trick where you lift the motor with a jack underneath.
__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods
|