Nissan 370Z Forum - View Single Post

Z eliminator · 01-26-2021, 04:12 AM

Update on the car
Got it back from nissan dealer, it now has spark, and fuel , but does not run.
it runs when pulling the cam shaft senser, looks like it has jumped some teeth on the timing chain.
it back fires and not drivable. it will not start wth the cam sensers plugged in
im hoping that the pistons did not hit the valves
The flex wheel was replaced with a new crank sensor .
i have a feeling the moter is junk.
im going to reload new map into the ecu, as they told me that my timming is way off.
if this does not work ,comes the job of taking the front end , rad, and ac coil out and taking the the front cover off the moter.

Z

01-26-2021, 04:12 AM	#3 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 18	Update on the car Got it back from nissan dealer, it now has spark, and fuel , but does not run. it runs when pulling the cam shaft senser, looks like it has jumped some teeth on the timing chain. it back fires and not drivable. it will not start wth the cam sensers plugged in im hoping that the pistons did not hit the valves The flex wheel was replaced with a new crank sensor . i have a feeling the moter is junk. im going to reload new map into the ecu, as they told me that my timming is way off. if this does not work ,comes the job of taking the front end , rad, and ac coil out and taking the the front cover off the moter. Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015. Last edited by Z eliminator; 01-26-2021 at 04:16 AM.