View Single Post
Old 01-20-2021, 03:25 PM   #5169 (permalink)
TreeSemdyZee
Premium Member
 
TreeSemdyZee's Avatar
 
Join Date: Dec 2009
Location: Kentuck-IANA
Age: 59
Posts: 4,880
Drives: '09 370 & ‘14 Juke
Rep Power: 27408
TreeSemdyZee has a reputation beyond reputeTreeSemdyZee has a reputation beyond reputeTreeSemdyZee has a reputation beyond reputeTreeSemdyZee has a reputation beyond reputeTreeSemdyZee has a reputation beyond reputeTreeSemdyZee has a reputation beyond reputeTreeSemdyZee has a reputation beyond reputeTreeSemdyZee has a reputation beyond reputeTreeSemdyZee has a reputation beyond reputeTreeSemdyZee has a reputation beyond reputeTreeSemdyZee has a reputation beyond repute
Default

Quote:
Originally Posted by PaulZ370 View Post
Finally, the Morimoto DRL/LED Headlights are now installed on the car - Properly! Morimoto sent me the Harness extensions needed and I was able to run the wiring properly to each headlight. Notes on the installation that you won't find in any of the other videos or even the Morimoto Instructions that come with these lights:


1. The DRL Harness that comes with the lights from Morimoto is way too short and will need extensions. I called Morimoto and complained and they sent me the wiring harness extensions free. However, the extensions have to be removed carefully from their outer jacket (as they come as a cable) before you can use them: Morimoto Cat #GTR.H044


2. The DRL Harness plugs into the fuse box in the battery compartment with a MICRO ATR Fuse Block. This fused block/plug end needs to have its wire bent at a sharp angle before you plug the fuse end in as there's hardly any room in the Fuse Box. I tried bending the wire AFTER I plugged the fuse block in and I almost bent the pins on the Fuse Block out of shape bad...


3. The Morimoto Instructions state that if you want the Sequential Direction Lights, you need to leave one of the plugs on the light unplugged. NOT TRUE (at least in my case). I had to remove the light off the car after I had installed it to PLUG the plug back in so I can get the Sequential Direction Light. Here's a pic of the plug unplugged (first install)
Attachment 146056


4. The Morimoto Instructions do not reference the fact that you need to take out the bolts from the bottom front of the Nose Cone before it will actually disengage from the car completely.


5. I broke at least 10 plastic clips that I had to replace with new. So make sure you have some extra plastic clips on hand.



6. For all of you OG's, you'll find that this little handy dandy tool will make the world of difference when you're doing this work...
Attachment 146057


7. Re-use the Morimoto boxes and Styrofoam packing to store your original headlights

And FINALLY, "La Piece de la Resistance":
Attachment 146052 Attachment 146053 Attachment 146055 Attachment 146054
Do want. These are very cool.
__________________
Borla S-Type | Motordyne | Z1 (lots) | South Bend | K&N | Nismo/Nismo S-Tune | Eibach | Aerojacket | Fujimara | Spl | ZSpeed Performance | Kenwood-Infinity-Sound Ordnance | Whiteline | Ecutek | Hotchkis | Clazzio | VQ Vortex |Morimoto XB |Dynosty Tune 329.64hp 265.73 ft/lb
TreeSemdyZee is offline   Reply With Quote