Originally Posted by sjwoodwalker

I appreciate the reply. I guess I should have put these question in the original post, but:

STFT B1 0.00% = Short-Term Fuel Trim for Bank 1 (right side)
LTFT B1 0.00% = Long-Term Fuel Trim for Bank 1 (right side)
STFT B2 1.60% = Bank 2 (left side)
LTFT B2 3.10%

Why is my STFT and LTFT B1 both at 0.00%? Should it be reading something like the bank 2s?

Also on the O2 sensors and A/F Sensors, what is the correct voltage for those? I had read they were supposed to be below .8v

Thanks again!