Nissan 370Z Forum - View Single Post

JLarson · 07-30-2020, 02:03 PM

I'm not totally clear on what you're asking about the fuel pump, but as far as other things you should do or will need -

1) Heat sleeve for the wastegate lines. And make sure when you run them they are well away from heat sources!
2) Heat wrap the hot side piping. DEI makes good wrap.
3) Turbo blanket for the turbo. Faster spool, less bleed to other components.
4) Omni map 4 bar sensor.

I'm running the 340 lph fuel pump and the Bosch 750 cc injectors with just over 500 whp on the 7.5 psi spring. According to my tuner, I'm about 80% duty cycle for the injectors, and could go to about 10 psi which would give me a couple more ponies if I wanted.

07-30-2020, 02:03 PM	#2 (permalink)
JLarson A True Z Fanatic Join Date: Jun 2017 Location: Media, PA Posts: 4,074 Drives: 14 Nissan 370z MR M6 Rep Power: 2684369	I'm not totally clear on what you're asking about the fuel pump, but as far as other things you should do or will need - 1) Heat sleeve for the wastegate lines. And make sure when you run them they are well away from heat sources! 2) Heat wrap the hot side piping. DEI makes good wrap. 3) Turbo blanket for the turbo. Faster spool, less bleed to other components. 4) Omni map 4 bar sensor. I'm running the 340 lph fuel pump and the Bosch 750 cc injectors with just over 500 whp on the 7.5 psi spring. According to my tuner, I'm about 80% duty cycle for the injectors, and could go to about 10 psi which would give me a couple more ponies if I wanted. __________________ 2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)