Got me curious...So I put the Z on the ramp.
This is a 16 Nismo, stock suspension. 255/40/19, stock wheels with 10mm spacer. At the tightest spot, I roughly measured 30mm or around 1.25 in from the tire sidewall to the upright.
The FUCA (sits on top of the upright) and subsequently the top of the upright should move parallel with the front wheel, so if they don’t touch while suspension is at full droop, then they won’t touch when the car is lowered back down.....
Give me some rope though, me no expert at wrenching
__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield
|