Originally Posted by OptionZero

I'm saying the thrust washers are made by Swift and SPL can get them for you. There's even a listing:

https://www.splparts.com/products/sw...t-washers.html

You just need to know the diameter of the springs Fortune uses

EDIT:
Do you have the SPL Mid-links? If so, those require 65mm ID springs (2.5 inch)
If you ordered from Fortune with a divorced set up, call the immediately and make sure they are sending you 65mm ID springs

Otherwise they may be sending you some 5 inch ID ones for the OEM bucket which will not work with the SPL midlinks

https://www.splparts.com/products/re...-370z-g37.html