So..... I checked the Vvel fuse...its one of those fusible links..that was good... cleaned the ground with a wire brush... installed a new vvel relay...swapped out with a different vvel module. Visually inspected the harness under the battery tray..Still a no go...
I dont know how I would test the module under load as the connector from the harness is enclosed.
At this point I'll order another module... I'll have to test the other relay before I order another one.
I hope it's not a bad harness..
__________________
-Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace
|