Nissan 370Z Forum - View Single Post - Which wires/harness are for the OEM reverse camera wiring in the centre console?

HotKgon · 11-21-2019, 01:08 PM

I just performed the NAV with Bose to after market headunit with working rear defrost (props to the amazing write up on the forum) conversion.

I am trying to wire my OEM reverse camera to my aftermarket headunit. Which harness and pin corresponds to the camera power and image signal?

I have the following cables I need to wire:
1x Yellow composite wire positive
1x Yellow composite wire negative
1x Camera power positive
1x Camera power negative

I found the following wiring and harness diagrams from the full service manual for 2011 models.

I also read that the power that goes to the camera needs to be stepped down to 6V (12V —> 6V).

Hopefully someone can help me out.

Thanks!!

11-21-2019, 01:08 PM	#1 (permalink)
HotKgon Base Member Join Date: Jan 2016 Location: Australia Posts: 24 Drives: 12 Nissan 370Z Rep Power: 9	Which wires/harness are for the OEM reverse camera wiring in the centre console? I just performed the NAV with Bose to after market headunit with working rear defrost (props to the amazing write up on the forum) conversion. I am trying to wire my OEM reverse camera to my aftermarket headunit. Which harness and pin corresponds to the camera power and image signal? I have the following cables I need to wire: 1x Yellow composite wire positive 1x Yellow composite wire negative 1x Camera power positive 1x Camera power negative I found the following wiring and harness diagrams from the full service manual for 2011 models. I also read that the power that goes to the camera needs to be stepped down to 6V (12V —> 6V). Hopefully someone can help me out. Thanks!!