Here is what you do to reset it:
With the ignition off open the driver’s side door.
Turn the ignition to the “On” position (do not start the car).
Roll the window all the way down. Then roll the window all the way up and hold the switch in the up position for 5 seconds.
After 5 seconds release the switch and test the auto up and down feature.
__________________
~Rob 
-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...
|