Quote:
Originally Posted by 1slow370
What cam are you running, c12's? Kelford?
|
I am running the C12/RZ1 combo and our own CNC porting on HR heads - remember this project actually started 4 years ago ........
I have a Quaife 69G sequential (ratios are 2.759, 2.05, 1.565, 1.268, 1.116 and 1.000 to 1) to go behind the engine with an OS Giken clutch. I have 3.9 and 4.08 FD ratio's. The MOTEC manages flat-shift on the up-change (strain gauge in the shifter) and when we get the ITB's controlled by the Jenvey DBW motors, I'll put paddles on the steering wheel and we'll go auto-blip on down-shift and rev-match on up-shift.