Quote:
Originally Posted by redondoaveb
Okay. Here's the procedure for the CS mirror adjustment.
1) Loosen 10mm locknut with ignition wrench.
2) Cinch down allen bolt with 3mm Allen wrench.
3) Tighten locknut.
Easy peasy.
|
Way different than the Evo-r ones. These have a flat non-bolt like ending to them that you tighten down with a flat head screwdrivers directly into the goodneck. You then have a small 8mm nut on the outside of the goose neck you supposedly tighten down to lock the neck into place. Then the top of the mirror has an Allen key lock for keeping the mirror assembly in place for rotations.