WOW on that manifold. My set is pre-used though, i bought it on here from a forum owner which made over 600whp with it and ran it successfully. I will keep it in mind.
I can drive the car with just the downpipes to exclude a blocked exhaust. I do not run catalic converters. Knock mainly on cyl 3 and 4
Because i was achieving knock with boost, i disconnected the wastegate flappers and drove without boost.
Here is a low RPM example, no boost and timing pull:
Here is a run started at higher RPM, with about 10psi of boost and a bit more timing. There is no timing pull here. As long as I start my runs in higher RPM ranges like 4500rpm+ i get no timing pull)
