Doing the first service since installing my BP v2 kit.
I read up that COMP recommends:
"For an engine mount setup, 6 pumps every 2500 miles."
https://docs.wixstatic.com/ugd/3bacc...66a4997609.pdf Pg13.
But Sasha once mentioned:
"...and for maintenance all that is needed is a shot of high temperature grease every time you are doing an oil change."
A shot implies to me a single pump, and some other members on here have stated 3-4 pumps. So now I'm thoroughly confused.
So how many pumps should I give it tomorrow?
Also, I typically do the usual engine oil service every 3000 miles.
Do I need to do it sooner now or is 500 miles extra realistically not that much difference? Comp Turbo also state for a rear mount setup that service interval is 3000 miles, but I wouldn't really call the BP design engine mount either being so low (implication being seeing more airflow over it, than tucked deep in an engine bay) and tucked up near the gearbox. I've also seen other COMP turbo users on here say they service every 3000-5000 miles.
Cheers,