Nissan 370Z Forum - View Single Post

KeCh · 02-22-2019, 03:45 AM

I was planning to install the SPC toe bolt along with my camber arms this weekend. I am going to be following the DIY post; however, I just have a few questions. I heard that the 2013+ 370z models have a steel sub frame instead of aluminum which makes things complicated. Which dremel bit should I use for the steel subframe since the recommended bits were for the aluminum subframe. Also, how could I protect my elongated holes from rusting. Could I just spray some primer for steel? Thanks.

02-22-2019, 03:45 AM	#1 (permalink)
KeCh Base Member Join Date: Sep 2018 Location: BC, Canada Posts: 5 Drives: 16 Nissan 370z M6 Rep Power: 6	Help/Advice with SPC Toe Bolt Install I was planning to install the SPC toe bolt along with my camber arms this weekend. I am going to be following the DIY post; however, I just have a few questions. I heard that the 2013+ 370z models have a steel sub frame instead of aluminum which makes things complicated. Which dremel bit should I use for the steel subframe since the recommended bits were for the aluminum subframe. Also, how could I protect my elongated holes from rusting. Could I just spray some primer for steel? Thanks.