Nissan 370Z Forum - View Single Post - Jim Wolf Cam testing for the VQ37VHR -- Results inside!

chuckie311 · 01-28-2019, 11:24 PM

before and After dyno will be done
here are my list of Mods before i install the C2 Cam..
Car will be dropped off at Seb at SpecialtyZ for install End of March
list of current mods
Ceramic Coated Z1 Headers
Stillen Gen 3 with Velocity stacks
Berk high Flow Cats
Ark Exhaust
Ported Stock Plenum
Ported Throttle Bodies
Ecutek Tuned
4.08 gears

Mods to be installed
Jim Wolf C2 cam
New Oil Pump to put the new Boundary Engineering VHR Billet Pump Gears in and Raise reline to 7900k
VQ37VHR Water Pump to replace the old one while the motor is out
Ported Lower Plenum to replace stock one
new Radiator Hoses
new spark plus
Bde Motor Mounts
FI HFC and Exhaust
vibra technics Transmission Mount

01-28-2019, 11:24 PM	#462 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 12	before and After dyno will be done here are my list of Mods before i install the C2 Cam.. Car will be dropped off at Seb at SpecialtyZ for install End of March list of current mods Ceramic Coated Z1 Headers Stillen Gen 3 with Velocity stacks Berk high Flow Cats Ark Exhaust Ported Stock Plenum Ported Throttle Bodies Ecutek Tuned 4.08 gears Mods to be installed Jim Wolf C2 cam New Oil Pump to put the new Boundary Engineering VHR Billet Pump Gears in and Raise reline to 7900k VQ37VHR Water Pump to replace the old one while the motor is out Ported Lower Plenum to replace stock one new Radiator Hoses new spark plus Bde Motor Mounts FI HFC and Exhaust vibra technics Transmission Mount __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears Last edited by chuckie311; 02-28-2019 at 09:50 PM.