Nissan 370Z Forum - View Single Post - [Build Thread] -- Journey to 700+ WHP [Supercharger]

TopgunZ · 10-29-2018, 03:14 PM

Are you guys just guessing you need a bigger front mount and bypass valve? Is there anything to back this up?

The bosch valve that stillen provides for use up to 10psi of boost has a total area of entry/exit of 5.07cm squared. The Tial QRJ has an entry/exit of 11.4cm.

Intake temps have not been an issue for the guys running up to 700whp. I guess if your goals are much higher than that, you could look into it.

10-29-2018, 03:14 PM	#310 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Are you guys just guessing you need a bigger front mount and bypass valve? Is there anything to back this up? The bosch valve that stillen provides for use up to 10psi of boost has a total area of entry/exit of 5.07cm squared. The Tial QRJ has an entry/exit of 11.4cm. Intake temps have not been an issue for the guys running up to 700whp. I guess if your goals are much higher than that, you could look into it. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM