Got some things done this week.
She's starting to look like a car again <3
Hopefully by mid-next week, she'll be alive and exercising (:
She's been sitting on her butt too long, D:
The things that are left to do so far is:
1) Install the rest of the A2A Kit
2) Remove demon bolts from one of the headers so we can isolate the cat and put it into this car (The unit is completely out of the vehicle already so it's okay)
3) Hook up the 2015 Red Z ECU to the Yellow 09 Car -- ByThaBay put the correct and most up to date firmware on the ECU to have it work and fit into the Yellow 09 Z.
4) Put all necessary fluids in:
- Transmission Oil || Coolant || Engine Oil || Etc... ||
5) Put the bumper and hood back onto the car
6) Torque a few things down to spec
7) Hook up the battery
8) Put the shift linkage spacer / gasket spikey thing back in
9) Hook up the PCV lines near the TB's which I have no idea where they go still...still need to figure that out
10) Hook up the headlights
11) Put in the modified fuel pump from the original Stillen Supercharger Kit
12) Start the car...hope she turns on correctly!... And after she runs correctly, will install the KW V3's again onto the suspension, and slap on the Quaife Diff (Which is already inside the pumpkin unit, so really, just need to swap pumpkins)
WE'RE ALMOST THERE FOLKS!
STAY TUNED
HUGE THANKS TO EVERYONE FOLLOWING THIS THREAD SINCE THE BEGINNING, SUPPORTING ME, ETC.
Love you Z Family <33