Nissan 370Z Forum - View Single Post - 3D printed battery tray for Odyssey PC680

DarkJak · 10-05-2018, 10:13 AM

Thanks SG! Do you happen to have the dimensions of the bottom nest?
I ended up buying Antigravity ATX-12 HD RS instead because I found it wasn't too expensive for a lithium. It cranked the Z right up

Ended up designing my own adapter based off the stock battery size and I stole your idea of using zero top/bottom layers and only having infill. Saved me a ton of filament and made the infill .9mm wide. (triangle pattern).

I can also make a few designs for others to adapt small batteries to the stock battery size, with a top piece and a bottom piece. Just need to know LxWxH.
Main issues I had were realizing that bottom nest is several cms larger than the stock battery,

10-05-2018, 10:13 AM	#10 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,390 Drives: 2009 370Z Rep Power: 13448	Thanks SG! Do you happen to have the dimensions of the bottom nest? I ended up buying Antigravity ATX-12 HD RS instead because I found it wasn't too expensive for a lithium. It cranked the Z right up Ended up designing my own adapter based off the stock battery size and I stole your idea of using zero top/bottom layers and only having infill. Saved me a ton of filament and made the infill .9mm wide. (triangle pattern). I can also make a few designs for others to adapt small batteries to the stock battery size, with a top piece and a bottom piece. Just need to know LxWxH. Main issues I had were realizing that bottom nest is several cms larger than the stock battery, __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668 Last edited by DarkJak; 10-05-2018 at 10:56 AM.