Nissan 370Z Forum - View Single Post

cupcakez · 10-04-2018, 09:05 PM

Hey guys!

My car is slowly being put back together..

A couple issues I ran into:
1) I lost my modded high pressurized overflow tank... anyone know where I can get another one or the part number for it?
I have the 2009 model 370z that is going to be the new body instead of the 2015 which was the Z that was wrecked.
Apparently the 09 model - 11 models don't have the pressurized coolant reservoir...

Anyone have ideas on how I could get around this to fit the TopgunZ A2A kit properly or nah?

2) No idea where the PCV lines right under the throttle bodies led...can't remember!

3) I don't know how, for the life of me, to remove the 2009 rusted ancient dinosaur fossilized demon bolts from the cat to the headers...lol. I need that cat but to get it I must remove those bolts. Any ideas to get it removed?

PS -- Is it possible to run this kit without an overflow tank in case I can't find one, ever again? T_T I have a regular overflow tank (not pressurized and not modded either) but I guess that one won't work?

Please and thank you for answers / ideas / tips / advice , etc.

10-04-2018, 09:05 PM	#256 (permalink)
cupcakez Track Member Join Date: Oct 2017 Location: California Posts: 635 Drives: 2009-7AT-Base-Coup Rep Power: 4835	Hey guys! My car is slowly being put back together.. A couple issues I ran into: 1) I lost my modded high pressurized overflow tank... anyone know where I can get another one or the part number for it? I have the 2009 model 370z that is going to be the new body instead of the 2015 which was the Z that was wrecked. Apparently the 09 model - 11 models don't have the pressurized coolant reservoir... Anyone have ideas on how I could get around this to fit the TopgunZ A2A kit properly or nah? 2) No idea where the PCV lines right under the throttle bodies led...can't remember! 3) I don't know how, for the life of me, to remove the 2009 rusted ancient dinosaur fossilized demon bolts from the cat to the headers...lol. I need that cat but to get it I must remove those bolts. Any ideas to get it removed? PS -- Is it possible to run this kit without an overflow tank in case I can't find one, ever again? T_T I have a regular overflow tank (not pressurized and not modded either) but I guess that one won't work? Please and thank you for answers / ideas / tips / advice , etc. __________________ \|\| ECUTEK (Eugene) \|\| A2A \|\| IPP Built Motor Stage IV Spec \|\| RJM Short Block \|\| Quaife LSD \|\| KW V3 \|\| Stillen-Exhaust \|\| 11.0.1 CR \|\| 928 Full Rebuild \|\| CPZ 34 Row Oil Cooler \|\| Last edited by cupcakez; 10-04-2018 at 09:16 PM.