Nissan 370Z Forum - View Single Post

Zguy306 · 08-25-2018, 01:54 PM

Hey guys. I've searched high and low for tips on this but can't seem to find good DIY tutorials on the Tein EDFC...at least for the 370. Already have the motors and coilovers installed just need to get everything put in place and the wiring done.

Looking for info on some good spots to mount the motor drivers on the front and in the rear hatch area and where a good spot is to mount the signal converter and power supply filter in the cabin.

Also, which accessory power supplies to tap into for everything? Called Tein and they said that everything that needs power should each be connected to different accessory power supplies to avoid any issues. Constant power isn't an option as it will drain the battery.

I know there's a few guys on here that have done this install and one of them even made a tutorial but it's an older post and pictures don't seem to work on that thread anymore. If anyone's done this install and cares to chime in please do so. Vehicle is a 2015 Nismo.

08-25-2018, 01:54 PM	#1 (permalink)
Zguy306 Base Member Join Date: Dec 2014 Location: Sask, Canada Posts: 3 Drives: 2015 370z Nismo Rep Power: 10	Tein EDFC Active Pro wiring/mounting Hey guys. I've searched high and low for tips on this but can't seem to find good DIY tutorials on the Tein EDFC...at least for the 370. Already have the motors and coilovers installed just need to get everything put in place and the wiring done. Looking for info on some good spots to mount the motor drivers on the front and in the rear hatch area and where a good spot is to mount the signal converter and power supply filter in the cabin. Also, which accessory power supplies to tap into for everything? Called Tein and they said that everything that needs power should each be connected to different accessory power supplies to avoid any issues. Constant power isn't an option as it will drain the battery. I know there's a few guys on here that have done this install and one of them even made a tutorial but it's an older post and pictures don't seem to work on that thread anymore. If anyone's done this install and cares to chime in please do so. Vehicle is a 2015 Nismo.