Installation of Fender Vents
Here's a sneak peek at the installation for the Fender Vents for the prototype:
(1) Align 3D Template to fender.
(2) Cut the fender with rotary cutting tool. (i.e. Dremel, or cut off wheel). There's plenty of material the flange of the Vent covers. If you take your time here, it's pretty straight forward
(3) Optional: Spray paint exposed area
(4) Optional: Modify Fender Liner (only rear sections) with shears, it's relatively easy to cut
(5) Attachment of Fender Vents. (Choice of drill and use hardware i.e. Rivets, or Round Head screws or permanently bond to fender with epoxy, etc)
|