Quote:
Originally Posted by fryzia23
I see you have stillen CAI. I would check all the clamps on bank 2 just to make sure you have no metered air going in. Also since your exhaust is custom, I would definitely check for leaks there as well before you start throwing parts on it.
|
If he ran speed density and still had the same issue, the CAI wouldn’t matter since speed density is based off manifold pressure. I would look at exhaust manifold leaks or check the gaskets where the test pipes meet the manifolds. You could also try swapping A/F sensors. Also there may be a light misfire condition or an injector issue.