View Single Post
Old 06-02-2018, 05:06 PM   #112 (permalink)
G3RSTY7
Base Member
 
G3RSTY7's Avatar
 
Join Date: Aug 2017
Location: Colorado
Posts: 103
Drives: Infiniti G37s 6MT
Rep Power: 7
G3RSTY7 is on a distinguished road
Default

So close... So first of all, stupid question but where do I plug in the VGA style cable from the wideband sensor? I sent Seb a rough idle log I’m sure he’s going to be like “WTH is this?” With no a/f except from O2 sensors.
We got the car idling and it ran super rich sounding like an old american muscle car being started up for the first time in 20 years. We played around with the fuel pressure—it started up originally at 72psi we thought it ran best around 45psi. Guy on twin turbos with stock (or at least smaller injectors) is running 65psi so i should need lower than that for the 1050x injectors.
Hopefully I can’t do too much damage on the motor idling at 400rpms. Damn push button start i just tried to turn on accessory to show my innovate gauge (at least ethanol content seems about right) and of course out of habit pushed in the clutch and the damn car started up! Car ran for a second or two longer after i immediately tried to turn it off—must be the RFS.
Waiting to hear from Seb what to do. Not sure how this flex fuel tuning works. Highly unlikely but perhaps the base tune i have is meant to be on ethanol? Haven’t really got much of an explanation of how it works, tuning the subaru the guys send you a damn bible how everything goes
Attached Images
File Type: jpg 6786634E-52FF-4E92-9264-5F6A49620512.jpg (297.9 KB, 66 views)
File Type: jpg 76E130A6-6428-42A8-A904-090D5EF4C9B9.jpg (281.0 KB, 43 views)
__________________
09 G37S RWD 6MT, Topgunz Supercharger, CJM RFS, Walbro 450, 1050x, Nismo 1.5way LSD, Ecutek FF tuned by Seb IG: G3RSTY7 MyG37.com: RickyBobby
G3RSTY7 is offline   Reply With Quote