eastwest2300

So I installed mine a couple months ago, and just recently, I installed Mr. Rusty's brace ^^ too.. I got 2 of the 3 bolts in.. and it was a lot easier to install the 2nd time around..

Let me give you guys a trick that really worked for me.. I took 2 zip ties and with one I made a circle.. the 2nd zip tie, I zip tied (not anywhere tight, I could easily fit 3 fingers) the bar that separates the master cylinder area from the engine bay, now take that 1st zip tie and interloop it to the 2nd. (like 2 wedding bands interlooped)

if you did this right, you should have 1 zip tie to the small metal bar, and another zip tie interlooped and hanging freely...now you'll take that zip tie thats hanging and use that with the gold nut (its actual threads) from the master cylinder to place down in the mounting location, and those zip ties will hold that nut into place while you can focus on lining up your holes..

I then used a socket with a allen head with really good lighting to get the upper and lower bolts into the holes.

__________________
Infiniti QX70 & Toyota Supra 3.0 Premium