It was a beautiful day today. In this winter season, having a 45 degree temp is a pretty good reward for us North easterners. So, I decided to do my 3rd synthetic oil change today (4th on the car).
I used K&N (HP-1008) for the last two oil changes. This time, after looking at MODSHACK's
oil cooler thread and
Shrute's Journal, I have decided to give Purolator PureOne filter a try. I have heard nothing but good things about them and some of my friends approved PureOne more than the K&N. Also, as you know, the stock filter is really small. If you go to the
Purolator website , they actually lists the smaller PL-14612 filter for Nissan 370Z, which is comparable to the stock size. But, many members here went with PL-14610 which is slightly bigger (Please see picture below for reference). This oil filter is a little cheaper than K&N ($6) and available at all automotive stores like Autozone/Pepboys etc.
Just like the last time, I did see some metal shavings/fragments on the magnetic drain plug. I'm sure there are metal shavings trapped by the filter magnet as well but I don't have an oil filter cutter
. I really wish I could open up one of these filters.
Here are some pictures to share:
Here's the filter I went with. Notice, it's the PL14610 which is slightly bigger than the stock filter
Here's a comparison picture. I took this picture because, when I went to some of the other journals, this filter looked way bigger than OEM (at least twice the size) but in reality, it's not. That's why I put an iphone next to it so that you can get an actual size idea. This filter def looks like the right size for the car, not the dinky OEM filter 
.
Metal shavings on the magnetic drain bolt.
Installed
I think I should seriously ask Aquafina to sponsor me! 
Also, I picked up this oil filter wrench from Pepboys few years back for $5. Definitely something you want to keep in your garage.
Crossed 14,000 miles this week! 
Quote:
Originally Posted by feelzpwr91
still the best DIY known to man kind lol
|
Thank you sir!
