Nissan 370Z Forum - View Single Post - Esser's LS3 Powered FD3S RX-7 R1

Esser · 12-13-2017, 10:59 AM

Made my own wire terminals for battery relocation.

Started wiring in the engine. I went with the PSI conversions wire harness. Quality seems spot on and price is great compared to all other harness manufacturers. I 3D printed a hole size reducer so that the 2inch firewall grommet on the harness would mate up to the existing 3inch hole on the FD firewall.

Heat wrap installed:

I was also able to get the samberg radiator installed:

12-13-2017, 10:59 AM	#22 (permalink)
Esser Base Member Join Date: Dec 2011 Location: St. Louis Posts: 83 Drives: 2004 350Z Rep Power: 18	Made my own wire terminals for battery relocation. Started wiring in the engine. I went with the PSI conversions wire harness. Quality seems spot on and price is great compared to all other harness manufacturers. I 3D printed a hole size reducer so that the 2inch firewall grommet on the harness would mate up to the existing 3inch hole on the FD firewall. Heat wrap installed: I was also able to get the samberg radiator installed: __________________