wildolympic

Matt, just a couple of tips to be aware of if you are doing the install your self, splicing the wires is a bit tricky, I put masking tape on the area around the car that I was working around to prevent any scratches and then I unplugged the tail light from the car (it makes it easier), I used wire strippers to notch between the area that I wanted to tap to and then an Exacto knife to slice the plastic coating, then I wrapped the 4th brake light wire around the bare tail light wires soldered them and wrapped the individual wires with black tape and then bundled the wires with more black tape and finally I zip tied it all together for a good clean fit hope this helps Tim.