Quote:
Originally Posted by Silver09
Installed a kenwood double din today. Everything works good but there's the flashing seat belt light on the tach... there was 2 factory harness that I had nothing to connect to with the metra harness and antenna.. any help?!
|
you're going to have to reset the light. I assume that you undid the airbag indicator to the right of the radio? There is a write up in the stickies in the audio section. check that out and you should be fine if you follow the procedure.
__________________
Current Cars:2014 370z, 1988 Suzuki Samurai (mint)
Past Cars: 2006 IS250, 2007 Scion TC (boosted), 2003 Civic SI EP3 and the list goes on...
|