Quote:
Originally Posted by Boosted Performance
This is V 1.0 of the kit, where the pipes are routed on the passenger side?
|
No I have your V2 kit and my issue is the pipe that had a dent to clear the subframe bolt we turn around, the pipe that goes by the lower control arm and turns over the steering rack and near the started before it turns beside the block towards the front to the intercooler.
MY IC piping in these areas have been rubbing the last few months in a few spots and it seems so tight I wont be able to make this clear granted this area is tight...
How abrasive resistant are silicone couplers and can I slide an extra one or two over the IC pipe in those areas to protect the IC piping in my two bad contact areas or will they wear through fast and be back to aluminum IC on metal?
On a side note can you tell me the vband clamp size for the recirculation piping heading back into the exhaust? It looks to be 1" or so? And lastly vband on turbo exhaust outlet.. stopping leaks at this point is an issue do you have an ideas?
Thank you in advance sasha