Nissan 370Z Forum - View Single Post

dhskiracer · 05-05-2016, 12:36 PM

Hi guys - new here - first post! Wanted to opinions on my alignment specs after Swift springs install (fully settled). Seems like my front has a little more negative camber than most with swift springs and is out of spec range (maybe because I have a heavy roadster).

In degrees:
Front L Camber -1.8 Toe 0.07
Front R Camber -1.8 Toe 0.07

Rear L Camber -1.6 Toe 0.18
Rear R Camber -1.6 Toe 0.14
(with the help of SPL)

I just wanted to get some opinions on whether or not I should invest in front camber arms. I like that its even left to right but this is my DD so I'm a little concerned about tire wear on the front. Can I expect front tire wear near close to stock with these numbers?

05-05-2016, 12:36 PM	#1 (permalink)
dhskiracer Base Member Join Date: Oct 2015 Location: Seattle/Soon Scottsdale Posts: 2 Drives: 10 Z Roadster PW A7 Rep Power: 9	Alignment tire wear with swift Hi guys - new here - first post! Wanted to opinions on my alignment specs after Swift springs install (fully settled). Seems like my front has a little more negative camber than most with swift springs and is out of spec range (maybe because I have a heavy roadster). In degrees: Front L Camber -1.8 Toe 0.07 Front R Camber -1.8 Toe 0.07 Rear L Camber -1.6 Toe 0.18 Rear R Camber -1.6 Toe 0.14 (with the help of SPL) I just wanted to get some opinions on whether or not I should invest in front camber arms. I like that its even left to right but this is my DD so I'm a little concerned about tire wear on the front. Can I expect front tire wear near close to stock with these numbers?