P010C, - 1. Run a new wire between the bank 2 MAF sensor and terminal 79 of the ECM or trace the harness to try to locate the broken wire.
Tech Tips: The wiring diagram does not show a connector between the MAF sensor and the ECM. Bank 2 is the driver's side. The ECM is located behind the right (passenger) side of the dash.
P1092 this code is something to do with VVEL CONTROL SHAFT POSITION SENSOR.
Did you extend your MAF wires your self and solder them?
Or did stillen provide you with new extended maf cables.
__________________
|