Nissan 370Z Forum - View Single Post

N8GTOL · 04-12-2016, 10:30 PM

Moog makes decent ball joints for pick-ups but no idea on end links. That said I would not hesitate to try them if the price is reasonable compared to something like SPL. I have seen the Whiteline endlinks have a few issues from others on here.

EDIT: looking at the moog construction...the SPL ones look far superior in both strength and alignment range. If your OE endings broke from a much stiffer swaybar setup like Hotchkis then the Moogs probably won't last much longer than OE. If your OE's just cropped out for some other reason (stripped or crossthreaded by accident for example) then an OE equivalent like Moog should be ok.

04-12-2016, 10:30 PM	#3 (permalink)
N8GTOL Base Member Join Date: May 2010 Location: San Diego Posts: 228 Drives: and flies Rep Power: 21	Moog makes decent ball joints for pick-ups but no idea on end links. That said I would not hesitate to try them if the price is reasonable compared to something like SPL. I have seen the Whiteline endlinks have a few issues from others on here. EDIT: looking at the moog construction...the SPL ones look far superior in both strength and alignment range. If your OE endings broke from a much stiffer swaybar setup like Hotchkis then the Moogs probably won't last much longer than OE. If your OE's just cropped out for some other reason (stripped or crossthreaded by accident for example) then an OE equivalent like Moog should be ok. Last edited by N8GTOL; 04-12-2016 at 10:38 PM.