Nissan 370Z Forum - View Single Post - Air Intake Temps- Stillen SC

StillenZ84 · 03-01-2016, 04:09 PM

Seb also sent me this video last night. That is why either e85 or some type of meth kit is critical for the Stillen kit, water cooled of course. We also discussed the air to air and he said that it would drastically take down the temps as Aaron has previously said. Our kit being water cooled is a MAJOR flaw. I will also be installing a temp sensor like the guy in the video did, where the old MAP sensor goes to test this as well.

03-01-2016, 04:09 PM	#5 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 17	Seb also sent me this video last night. That is why either e85 or some type of meth kit is critical for the Stillen kit, water cooled of course. We also discussed the air to air and he said that it would drastically take down the temps as Aaron has previously said. Our kit being water cooled is a MAJOR flaw. I will also be installing a temp sensor like the guy in the video did, where the old MAP sensor goes to test this as well. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34 Last edited by StillenZ84; 03-01-2016 at 04:13 PM.