You have two issues. It is not centered and it is not leveled. Off by as much as 3/16 to a quarter of an inch. You will need to dremel the holes larger starting at 12 o'clock going to 3 o'clock. If they did not use tape on the far edges of the wing and tightened the sh!t out of it, you might see some paint damage. Good luck.
Edit: with the enlarged holes use rubber washers along with the metal ones to keep water from seeping through.
__________________
>MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete
Last edited by axmea?; 02-27-2016 at 08:42 AM.
|