Nissan 370Z Forum - View Single Post - fLat bottomed (girls) make the race car go round!!!

synolimit · 01-28-2016, 07:22 PM

Both sides done. I've decided not to use the same material to cover the center section. I'm going to try and save weight. I used the dibond for the sides for strength as they stick out pretty far but the center will be just thin aluminium. I also did access holes for my jacks and I'll be using the same thin aluminium to make removable plates for these holes. Last I had some black vinyl around so I wrapped the sides to blend into the side skirts.

01-28-2016, 07:22 PM	#42 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	Both sides done. I've decided not to use the same material to cover the center section. I'm going to try and save weight. I used the dibond for the sides for strength as they stick out pretty far but the center will be just thin aluminium. I also did access holes for my jacks and I'll be using the same thin aluminium to make removable plates for these holes. Last I had some black vinyl around so I wrapped the sides to blend into the side skirts. __________________ 13 370z-