1. Thanks
2. Yes im gonna run aluminium 1/8" plate to the diffuser like the front spliter and will be going to the body under the trunk and stuff and also the rear bumper beam.
3. The hoods cut and vents very well.
4. The front has 2" brake ducts already but im planning on adding a 2nd 2" that'll get air from the front end grill mesh vs the velocity stacks attached to the front bumper already. Also the rear gets air from the window scoops.
5. The rear bumper oem fake fog light and cutouts for the exhaust is gone so a nice 3" gap is missing from the bumper to the splittter. So any engine heat should go under the car between the body gaps and the flat bottom and exit out the rear bumper gap. The rear diff cooler has the window scoops also feeding it air to the cooler so sadly it'll get a mix of extreme hot and ambient. I might add a naca duct on the flat bottom and run a hose there also to the diff cooler so its being fed 3 ambient tubes.
6. I do wanna add fender vents. Martin makes some but im thinking more of a STI 207 long skinny vent.
__________________
13 370z-
|