The oil pan needs a good bit of prying to get off. Take all the bolts off. Then use a flat bar ( one that is shaped like an "L") and stick the shorter end between the pan and block. Give it a few good wings with the hammer till it works itself in. Use a second pry bar or big long screwdriver to work your way around loosening the pan. The pan will be warped a little in the pry area but you can beat it strait again with a flat surface and a socket or something.
As for the two wire harness, one is for the Exa, one is for the fuel pump.
I think I have pics somewhere in my build thread.
YzGyz
|